CUTTERMASTER CM-01

CUTTERMASTER CM-01 MG-30

The Original 1972 CUTTERMASTER End Mill Sharpener

Designed in the US in 1972 the CUTTERMASTER Tool and Cutter Grinder continues to be the standard in end mill sharpeners. Ask us about our updated DC variable speed version.

    • Grinds O.D.s and ends of standard end mills in one setup within minutes
    • Extremely versatile and used for more than just end mills. With the z-axis you get 8 different axes to work with
    • Grind end mill, drills, roughing end mill, taps, countersinks, carbide tools, end mill radiuses, lathe tool bits, various forms tools, reamers, gashing
    • The pneumatic finger automatically sets primary and secondary clearance angles with the flip of switch
    • Dials zero out
    • Air bearing has a 360° swivel base for taper grinding
    • The Jet-Stream air bearing fixture is precision honed and capable of grinding to close tolerances
    • The spindle sleeve is made from stainless steel and the spindle itself is hard chromed steel
    • Takes standard 5C collets, with end mill holders available that can hold shank sizes up to 2″
    • Tables are cast 2″ iron and precision ground
    • Motor/spindle assembly tilts to positive and negative angles
    • Cutting tool clearance angles can be adjusted as needed
    • Grinding chart provides clearance angles for all end mills from 3/16″-3″
    • 1 year warranty against factory defects and workmanship

    CUTTERMASTER Tool and Cutter Grinder Specifications

    The Original 1972 CUTTERMASTER CM-01 $3,696.00
    The 2014 CUTTERMASTER CM-01 DC $4,875.00
    Air Bearing Stroke 10.5″ (266.7mm)
    Air Bearing Swing Over Table 9.8″ (248.92)
    Cutting Tool Capacity 2″ shank, 9.8″ O.D.
    Flute Length 10.5″
    T-Slot Dimension 0.8″ (20.32mm) x 0.5″ (12.7mm) x 0.67″ (17.018mm)
    Table Feed Gradations 0.001″ (0.02mm)
    X-Axis Table Travel 6″ (152.4mm)
    Y-Axis Table Travel 3″ (76.2mm) + sildes back & forth 6″ (152.4mm)
    X-Axis Table Working Space 16.5″ (419.1mm) x 5.5″ (139.7mm)
    Y-Axis Table Working space 13″ (330.2) x 5.5″ (139.7)
    Wheel 5″ x 1.25″ cup or 6″ dish with Z-axis
    Motor Tilt +35° -8°
    Motor 1/3 hp, 3450 rpm, 110v / 60Hz or 220v 50Hz
    Net Weight 180lbs (82Kg)
    Gross Weight 232lb (106Kg)
    Machine Dimensions excluding handles 21″ x 20″ x 21″
    Shipping Dimensions 30″ x 28″ x 29″

    CUTTERMASTER Tool and Cutter Grinder Accessories

    To purchase, call us at (800) 417-2171 or (613) 523 7753

    CM-01 The Original 1972 CUTTERMASTER CM-01 $3,650.00
    CM-01 DC The 2014 CUTTERMASTER CM-01 DC with multi axis constant torque variable speed DC motor. Patent Pending $4,875.00
    CM-02A Cuttermaster air bearing fixture with stylus & index collar $1,690.00
    CM-03C Radius attachment, includes center finder $1,255.00
    CM-04 Center finder for radius attachment $36.00
    CM-05P Dual positioning pneumatic finger $615.00
    CMS-06 Drill attachment complete with two chucks (capacity 0.125 – 0.875) $410.00
    CM-08 Taper attachment $96.00
    CM-10 Cabinet base $425.00
    CM-11 Working fixture $689.00
    CM-12 Diamond dresser $112.00
    CM-15 Z-axis with wheel guard and ABF riser (Spindle Extension required) $1,830.00
    CM-M70 Spindle Extension for use with Z-Axis $255.00
    CM-16 Universal Grinding Fixture (with cam action and 12 index collar) $1,580.00  TBA
    CM-17 Extended length draw bar (work with universal grinding fixture) $146.00
    CM-20 5″ cup, pink aluminum oxide, 60 grit $60.00
    CM-21 5″ cup, white aluminum oxide, 80 grit with 3/4″ face $90
    CM-22 5″ cup, blue ceramic, 80 grit $196.00
    CM-23 5″ cup, pink aluminum oxide, 60 grit with 3/4″ face $89.00
    CM-25 6″ dish, blue ceramic, 60 grit $99.00
    CM-26 6″ dish, aluminum oxide, 38 grit $138.00
    CM-30 5″ cup, diamond, 120 grit $236.00
    CM-30/500 5″ cup, diamond 500 grit $276.00
    CM-31 5″ cup, CBN, 100 grit $255.00
    CM-32 5″ cup, CBN, 100 grit with 3/4″ face $260.00
    CM-33 6″ dish, diamond, 150 grit $278.00
    CM-33/500 6″ dish, diamond 500 grit $278.00
    CM-5CE-112 1-1/2″ 5C End Mill Holder $212.00
    CM-5CE-114 1-1/4″ 5C End Mill Holder $96.00
    CM-5CE-2 2″ 5C End Mill Holder $156.00
    CM-5CE-32 32mm 5C End Mill Holder $96.00
    CM-5CE-40 40mm 5C End Mill Holder $112.00
    CM-5CE-50 50mm 5C End Mill Holder $125.00
    CM-5CHS-6 6 pc. Hardinge 5ST 4 split Collet Set (high accuracy) $360.00
    CM-5CMS-6 6 pc. 5C metric Collet Set (economy) 6, 10, 12, 16, 20 & 25mm $54.00
    CM-5CRS-7 7 pc. Hardinge 5C 3 split Collet Set (inch) $280.00
    CM-5CRSM-6 6 pc. Hardinge 5C metric 3 split Collet Set $190.00
    CM-5CS-7 7 pc. 5C Collet Set (economy) 1/4, 3/8, 1/2, 5/8, 3/4, 7/8, 1″ $63.00
    CM-EAS-8 8 pc. Expanding Arbor Set (¼.. . 1¼..) $196.00
    CM-GDA Gun drill sharpening attachment $NA
    CM-GDA-TH Gun drill sharpening attachment for 1.0mm – 3.5mm gun drills $NA